Price Book

Routing of 1/2-inch Flexible Metal Conduit (FMC / Greenfield) through concealed residential wall cavities, dropped ceilings, or dense attic spaces. Provides robust mechanical armoring for branch circuit wiring where rigid conduit execution is structurally impractical, meeting strict interior fire-blocking and physical protection construction codes.

Installation of a 100-Amp secondary distribution subpanel to expand circuit availability for home additions, garage workshops, or Accessory Dwelling Units (ADUs). Price includes up to 50 linear feet of heavy-gauge feeder conductors routed securely through accessible attic crawlspaces or basements, complete with a clean surface or flush-mount enclosure, subpanel bonding isolation, and a dedicated master supply breaker in the main panel.

Turnkey engineering and replacement of an outdated or hazardous main electrical service panel with a modern, code-compliant 200A outdoor combination panel. Package encompasses all LADBS architectural permit routing, Southern California Edison or LADWP utility coordination, installation of dual 8-foot copper grounding rods, cold water pipe bonding, precision circuit labeling, and standard clean cutting of exterior stucco walls.

Provide and install a new 125A Sub Panel in a location per plan. Provide and install AFCI/GFCI breakers as needed. Provide and install a new Surge Protector as needed per code. Provide and install a new separate grounding system as needed per code for detached ADU.

Provide and install a new 125A Sub Panel in a location per plan. Provide and install AFCI/GFCI breakers as needed. Provide and install a new Surge Protector as needed per code. Provide and install a new separate grounding system as needed per code for detached ADU.

Create a new grounding system for 200 Amp feed. Including 2 8ft copper grounding electrodes, #4 armed cable, grounding clamps, and main water bonding.

In case the utility company decides to relocate the main connections to the ADU we will need to run a new 200A feed for the existing house. Price includes providing and running the pipes and wires and connecting to the panels. *Not including Trenching

Replace the existing electrical service with a new code-compliant electrical panel supplied by an underground utility service. Scope includes obtaining all required permits, coordinating inspections, preparing and submitting the utility service application package, and providing all required engineering documentation, including a single-line diagram, electrical load calculations, and a plot/site plan for utility approval. Service includes coordination with the power company, inspection scheduling, and final approval. Installation is performed in accordance with all applicable NEC, local jurisdiction, and utility requirements. Excludes: Stucco patch, Utility company fees, trenching or excavation beyond the specified scope, concrete or asphalt replacement, utility-owned equipment, unforeseen code corrections, and repairs to concealed or damaged wiring discovered during construction. Pricing is subject to site conditions and utility requirements.

Premium heavy-up infrastructure upgrade to a 400A dual-meter or single-main service distribution system. Engineered specifically for luxury Los Angeles estates demanding simultaneous power for multiple EV chargers, solar arrays, battery storage, and multi-zone HVAC. Includes comprehensive utility load calculations, structural framing structural reviews, mandatory LADBS engineering coordination, and heavy-duty grounding infrastructure integration.

Run 14/3 wires as needed, install boxes in desired locations, and provide and install 3/4 way dimmer switches.

Exposed installation of 3/4-inch Electrical Metallic Tubing (EMT) thin-wall steel conduit along interior garage walls, basements, or masonry. Formulated using precision hydraulic benders for clean offsets, structural compression couplings, and heavy-duty steel straps anchored directly to the structure. Price covers up to 3 individual THHN solid or stranded copper conductors pulled per foot.

Installation of premium 3/4-inch Liquidtight Flexible Metallic Conduit (LFMC / Sealtite) featuring a moisture-tight, UV-resistant polyvinyl chloride jacket over an interlocking spiral metallic core. Specifically engineered to withstand wet, outdoor, or high-vibration environments such as air conditioning condenser disconnect paths, pool pumps, tankless water heaters, and exterior generator interfaces.

Installation of heavy-wall, impact-resistant 3/4-inch Schedule 80 PVC rigid non-metallic conduit. Optimized for underground trench burial or low-to-the-ground exterior pathways highly vulnerable to physical damage. Price includes solvent-welded watertight joints, specialized expansion couplings to manage Southern California thermal shifts, and heavy straps (excludes major trenching excavation labor).

Upgraded installation of a dual-function Arc-Fault and Ground-Fault Circuit Interrupter (AFCI/GFCI) safety breaker, required by modern California Electrical Code for high-risk residential living spaces. Includes comprehensive micro-fracture line diagnostic testing to identify, isolate, and eliminate latent nuisance tripping hazards across the entire downstream branch circuit.

Billable hourly labor rate for subsequent on-site troubleshooting, complex circuit tracing, or custom installation routing. Applied in 15-minute increments after the initial diagnostic hour expires, utilizing premium testing equipment and expert technical labor to resolve non-standard residential electrical anomalies.

Run wires as needed, Provide and install Panasonic exhaust fan and humidity sensors switch as needed per code. Run 4" Flex Duct to the roof. (not including roof flushing).

Professional unboxing, mechanical assembly, electronic blade balancing, and mounting of a customer-supplied ceiling fan onto a pre-verified, structurally sound, fan-rated junction box. Includes configuring integrated pull chains or wireless remote receiver arrays, checking motor torque vibration, and adjusting canopy clearance to eliminate ceiling hums.

Complete structural and electrical installation for a brand new ceiling fan location. Includes mapping and cutting ceiling drywall, retrofitting an ultra-sturdy heavy-duty steel fan brace rated for high-vibration loads, running a new branch switch leg through the ceiling framing, and executing complete assembly, balancing, and structural connection of the fan assembly.

Cut a trench in the kitchen concrete floor to run a line for the microwave island.

Run wires as needed and install Ceiling Fan/Chandelier rated box. NOT including providing and installation of the finished product. (Price for installation will be given once client will choose the finish product).

Run 3×20A dedicated lines from the sub panel to the kitchen and provide and install GFCI Outlets. Two dedicated lines for small appliances one dedicated line for the dishwasher.

Engineering and routing of a dedicated 20-Amp isolated branch circuit designed to isolate power spikes from heavy residential appliances (microwaves, refrigerators, sub-zero freezers, server racks). Includes up to 50 feet of high-grade copper wiring, a dedicated single-pole 20A breaker, a commercial-spec single outlet receptacle, and full line load calculations.

Run a new dedicated 20 amp line to the new Island microwave.

Run wires Provide and install breaker Install car charger

Priority emergency response dispatch during nights, weekends, or observed holidays. Includes rapid mobilization of a fully stocked service truck, expedited travel premiums through the LA metro area, specialized emergency diagnostic equipment deployment, and the first hour of critical troubleshooting labor to stabilize, isolate, and secure hazardous electrical failures.

Replace existing GFCI outlets where needed in the kitchen and bathrooms

Critical safety upgrade displacing standard receptacles with a smart-sensing Ground Fault Circuit Interrupter (GFCI) in high-risk wet zones (kitchens, bathrooms, garages, exteriors). Features line/load safety mapping to extend shock protection to downstream devices on the same loop, accompanied by rigorous manual and simulated open-neutral trip testing.

Run 3 home runs for the new addition from the panel and provide and install new AFCI breakers as needed per code.

Extended structural deployment of a dedicated 50-Amp Level 2 EV charging station infrastructure. Includes running up to 50 linear feet of heavy-gauge THHN copper conductors protected within structural conduit or metallic framing through complex attic spaces, sub-floors, or garage framing structures. Features terminal torque certification, mandatory safety panel label placement, and complete end-to-end voltage drop testing under load simulation.

Direct engineering and installation of a dedicated 50-Amp high-voltage circuit to support rapid Level 2 electric vehicle charging. Includes hardwiring a customer-supplied charging station (Tesla, ChargePoint, Wallbox) within 10 linear feet of the primary electrical panel. Includes a dedicated 50A dual-pole breaker and localized thermal safety verification.

Provide and install new 2 Gang meter combo to accommodate future ADU. Panels to be installed surface mount. Run new 2" Rigid conduit with new 2/0 wires for the new feeder per meter spot. Relocate existing circuits to a new sub adjacent to new meteor combo. Provide and install new AFCI Breakers as needed per code. Provide and install a New surge protector as needed per code. Provide and install a new low-voltage bridge as needed per code. Create a new 200 amp grounding system, including 2 ground rods and Maine water Bonding with #4 armed cable.

Provide and install new 2 Gang meter combo to accommodate future ADU. Panels to be installed surface mount. Run new 2" Rigid conduit with new 2/0 wires for the new feeder per meter spot. Relocate existing circuits to a new sub adjacent to new meteor combo. Provide and install new AFCI Breakers as needed per code. Provide and install a New surge protector as needed per code. Provide and install a new low-voltage bridge as needed per code. Create a new 200 amp grounding system, including 2 ground rods and Maine water Bonding with #4 armed cable.

Run at 240v 50A line from the side panel to the kitchen for the electrical oven and micro combo unit. Provide and install a 4 prong 50A outlet. Provide and install 50A GFCI breaker as needed per code.

Provide and install new Decora Style switch in the same location.

Provide and install new Dimmer in the same location

Replace old outlet with a new white Decorah style Temper Resistant outlet.

Run wires as needed, provide and install Canless recessed lights.

Provide and install new Decora Style switch in the same location.

Provide and install new white Decora-style switch in the same location.

Run wires and install box for new reading lights. install finish product provided by client.

Premium per-fixture installation of an ultra-thin, high-efficacy LED recessed downlight. Architecturally integrated into existing drywall ceilings utilizing advanced dust-containment cutting shrouds. Fixtures are strict California Title 24 energy compliant, airtight, and insulation-contact (IC) rated to preserve home thermal boundaries while offering selectable Kelvin color temperatures.

Esthetic and functional update replacing a worn, loose, or dated single-pole toggle switch or duplex receptacle with a modern, high-durability designer device. Features modern side-wire terminal termination with individual copper lead pigtailing, structural alignment leveling, and installation of clean, impact-resistant screwless faceplates.

Life-safety compliance replacement of an expired or failing hardwired detector. Installs a premium dual-sensor Smoke and Carbon Monoxide detector featuring a 10-year tamper-proof sealed lithium battery backup. Includes structural mounting ring updates, line voltage pigtailing, and localized multi-point communication interconnect testing across the entire household safety grid.

Comprehensive dispatch of a California-certified electrician to the property. Fees cover fuel, vehicle maintenance, and navigation of Los Angeles traffic grid, alongside full multi-meter diagnostic analysis of the reported failure, visual safety inspection of the immediate electrical subsystem, and the first hour of expert troubleshooting labor.

Careful removal of a legacy overhead lighting fixture and the precision installation of a customer-supplied designer fixture or chandelier on ceilings up to 10 feet. Includes thorough testing and structural reinforcement of the existing junction box, verification of branch grounding integrity, and weight-safe crossbar adaptation.

Precision replacement of a fatigued, humming, or defective standard 15-Amp or 20-Amp single-pole thermal-magnetic breaker. Service features terminal torque testing to strict manufacturer specification using calibrated digital torque tools, a thermal imaging scan of adjacent busbars to detect hidden heat anomalies, and verification of branch circuit load stability.

Run wires as needed, install box and provide and install recessed TV outlet

Installation of an industrial-strength, multi-stage Type 2 Surge Protective Device (SPD) hardwired directly to the primary main panel busbars. Formulated to intercept and safely clamp destructive voltage transients from utility grid switching or localized lightning strikes up to 50,000 Amps, providing blanket protection for all vulnerable home electronics, automation systems, and smart appliances.

Run wires as needed, install box, provide and install GFCI outlet.

Run wires as needed, install box, provide and install switch

Run wires as needed, install box, provide and install outlet.